1. Raw materials are non-toxic and safe

鋁箔都是由原鋁化后經多道工序軋制而成，本身不含重金屬等有害物質。鋁箔生產過程中，高溫退火對食品進行消毒處理，使其與食品安全接觸，不受細菌的侵害。大多數時候，鋁箔不會與食物發生反應。而且市場上有不少塑料餐盒都是用來源不明的原材料，甚至是假貨、廢塑料制作的，質量很難可靠。一次性塑料餐具在生產原料中添加碳酸鈣、滑石粉、工業石蠟、回收廢棄物，產品蒸發殘渣(正己烷)容易超過標準。2013年7月，質檢總局、工商總局、食品藥品監督總局發布了《關于切實加強一次性發泡餐具監督管理的通知》。一些地方政府還規定，一次性不可降解塑料餐具的使用受到限制，以保護環境，防止塑化劑對社會和人體有害。

Aluminum foil is rolled by multiple processes after primary Aluminization, and it does not contain harmful substances such as heavy metals. In the process of aluminum foil production, food is disinfected by high-temperature annealing to make it contact with food safely and free from bacteria. Most of the time, aluminum foil will not react with food. Moreover, many plastic lunch boxes on the market are made of raw materials from unknown sources, even fake goods and waste plastics, so the quality is difficult to be reliable. For disposable plastic tableware, calcium carbonate, talc powder, industrial paraffin and recycled waste are added to the production raw materials, and the product evaporation residue (n-hexane) is easy to exceed the standard. In July 2013, AQSIQ, SAIC and the food and Drug Administration issued the notice on strengthening the supervision and administration of disposable foamed tableware. Some local governments also stipulate that the use of disposable non degradable plastic tableware is limited to protect the environment and prevent plasticizers from being harmful to society and human body.

2、受熱容易，加熱無有害物質。

2. It is easy to be heated without harmful substances.

鋁箔有很高的導電性，能夠大大減少與食品加工、冷藏和二次加熱相關的時間和能量。鋁箔具有良好的熱穩定性，在其加工、包裝過程中能很好地承受溫度的變化，在承受-20℃~250℃的高低溫環境下，其分子結構穩定不變。其使用溫度可從快速冷凍到極端烘烤、烤制，在這段時間內，不變形、不破裂、不熔化或燒焦，并且不產生有害物質。用高溫的炭火與煙熏隔開，可以避免造成食物燃燒引起的致癌物質。鋁箔盒及容器適用于高溫滅菌及熱封處理。鋁箔盒容器可以用各種烤箱、烤箱、無氧加熱箱、鍋、箱、微波爐(一定要用于烤箱)、壓力鍋加熱用鋁箔包裝的食品等多種加熱。相關企業已經開發了一套鋁箔盒二次加熱設備和封裝設備，可以大幅度提高餐飲企業的配送效率、餐飲質量。相比之下，塑料盒和容器的耐高溫特性明顯低于鋁箔制品，接觸高溫食品、水或高溫加熱后釋放有害物質，影響人體健康。(發泡盒由聚苯乙烯原料制成。聚苯乙烯原料的軟化點為8-7℃以上不能使用的溫度在80℃以上)。

Aluminum foil has high conductivity, which can greatly reduce the time and energy related to food processing, refrigeration and secondary heating. Aluminum foil has good thermal stability. It can well withstand the change of temperature in the process of processing and packaging. Its molecular structure is stable under the high and low temperature environment of - 20 ℃ ~ 250 ℃. Its service temperature can range from rapid freezing to extreme baking and baking. During this period, it will not deform, crack, melt or scorch, and will not produce harmful substances. Separated by high-temperature charcoal fire and smoke, carcinogens caused by food combustion can be avoided. Aluminum foil boxes and containers are suitable for high temperature sterilization and heat sealing treatment. Aluminum foil boxes and containers can be heated by various ovens, ovens, anaerobic heating ovens, pots, ovens, microwave ovens (must be used in ovens), pressure cookers, food packaged with aluminum foil, etc. Relevant enterprises have developed a set of aluminum foil box secondary heating equipment and packaging equipment, which can greatly improve the distribution efficiency and catering quality of catering enterprises. In contrast, the high temperature resistance of plastic boxes and containers is significantly lower than that of aluminum foil products. After contacting high-temperature food, water or high-temperature heating, harmful substances are released, affecting human health. (the foam box is made of polystyrene raw material. The softening point of polystyrene raw material is above 8-7 ℃, and the temperature that cannot be used is above 80 ℃).

3、容易成型，方便密封和包覆， 食品衛生

3. Easy to form, easy to seal and cover, food hygiene

鋁箔的成形性好。沖裁餐具的加工過程中，即使有起皺和卷曲的邊緣，也不會產生裂紋。按需要選擇各種形狀、厚度、合金形狀和熱處理狀態的鋁箔，更能體現產品的使用價值。鋁箔盒和容器可以同時使用鋁箔蓋，也可以使用紙或其他材料材料蓋，利用易成型、皺紋等特點，實現密封，保溫保鮮能力強，避免食品在貯藏中撒布或污染，大幅度減少食品浪費。采用鋁箔盒生產企業開發的自動封蓋設備，在大型餐飲企業和集中廚房配送中，其配送效率明顯優于其他材料。

Aluminum foil has good formability. During the processing of blanking tableware, even if there are wrinkled and curled edges, there will be no cracks. Select aluminum foil with various shapes, thicknesses, alloy shapes and heat treatment conditions as required, which can better reflect the use value of the product. Aluminum foil boxes and containers can be covered with aluminum foil at the same time, or paper or other materials. Using the characteristics of easy forming and wrinkles, they can realize sealing, strong heat preservation and fresh-keeping ability, avoid food spreading or pollution in storage, and greatly reduce food waste. Using the automatic capping equipment developed by aluminum foil box production enterprises, its distribution efficiency is obviously better than other materials in large catering enterprises and centralized kitchen distribution.

4、高阻隔性，密封后能保護食品原味，延長食品的保質期。

4. High barrier, it can protect the original flavor of food and prolong the shelf life of food after sealing.

薄而不透光，能完全阻隔光、氣等物質，增加保鮮度，保護水分，防止味道泄漏和混合，有效保持產品風味和特性。利用鋁箔飯盒包裝食品或預包裝食品，實現冷熱鏈配送，方便食品企業、餐廳、超市、家庭存放，避免變質，延長保質期，減少浪費。這樣，大量的能量和能量就可以被間接的節約出來。

Thin and opaque, it can completely block light, gas and other substances, increase freshness, protect moisture, prevent taste leakage and mixing, and effectively maintain the flavor and characteristics of the product. Aluminum foil lunch boxes are used to pack food or prepackaged food to realize cold and hot chain distribution, which is convenient for food enterprises, restaurants, supermarkets and families to store, avoid deterioration, prolong shelf life and reduce waste. A lot of energy can be saved indirectly.

5、能有效的回收再利用，保護環境，節約資源。

5. It can effectively recycle, protect the environment and save resources.

鋁具有極高的回收再生性，可無限回收利用，同時限制質量損失，保持本來的特性。回收的鋁可以用來制造大量的產品。回收過程中，鋁箔的耗能僅為原鋁生產所需能量的5%，而溫室氣體排放量比原鋁減少95%。用后可方便地壓緊鋁箔餐盒，方便分類，減少垃圾產生。

Aluminum has extremely high recyclability, which can be recycled indefinitely, while limiting mass loss and maintaining its original characteristics. Recycled aluminum can be used to make a large number of products. In the recycling process, the energy consumption of aluminum foil is only 5% of the energy required for primary aluminum production, while the greenhouse gas emission is 95% lower than that of primary aluminum. After use, the aluminum foil lunch box can be pressed conveniently, which is convenient for classification and reduces the generation of garbage.

鋁箔盒和容器在一定程度上可用于垃圾發電。即使埋入鋁箔，也不會污染土壤和水。但是，現在塑料盒，特別是發泡塑料盒的回收價值低，回收率低，回收狀況不好，大量的廢棄引起嚴重的白色污染，影響市容和自然景觀，對生態環境也有潛在的危害。所以，近年來，像發泡機和杯盤這樣的產品已經被紐約、舊金山、西雅圖、華盛頓特區、波特蘭、加拿大多倫多和法國巴黎等大都市禁止。

Aluminum foil boxes and containers can be used for waste power generation to a certain extent. Even if the aluminum foil is embedded, it will not pollute the soil and water. However, now plastic boxes, especially foamed plastic boxes, have low recycling value, low recycling rate and poor recycling status. A large number of wastes cause serious white pollution, affect the city appearance and natural landscape, and also have potential harm to the ecological environment. Therefore, in recent years, products such as foaming machines and cups and plates have been banned by metropolises such as New York, San Francisco, Seattle, Washington, D.C., Portland, Toronto, Canada and Paris, France.

與其他資源相比，鋁資源儲量豐富，廢鋁回收量增加，資源瓶頸小。鋁箔很薄很輕，厚度在0.009-0.03mm之間，重量只有幾克到10克，材料很少，是產品包裝的比例。如果鋁箔餐盒和容器可以大量應用和推廣，可以代替塑料和紙制品，大大節約石油、木材等資源消耗，提高資源利用效率，提高環境質量。

Compared with other resources, aluminum resources are abundant, the recovery of waste aluminum is increased, and the resource bottleneck is small. Aluminum foil is very thin and light, with a thickness of 0.009-0.03mm, a weight of only a few grams to 10 grams, and few materials, which is the proportion of product packaging. The application of aluminum foil can greatly improve the quality and efficiency of food containers and the environment by replacing a large number of oil and plastic containers.

回收鋁包裝材料的方法和途徑很多，幾乎所有廢棄的鋁包裝都可以回收利用。隨著社會、政府和公眾對回收利用意識的認同，回收技術的進步以及回收體系的完善。

There are many ways to recycle aluminum packaging materials. Almost all waste aluminum packaging can be recycled. With the recognition of society, government and the public on the awareness of recycling, the progress of recycling technology and the improvement of recycling system.